Signal Processing Group Inc, 51W Elliot Road, #103, Tempe, Arizona 85284. Tel: 866-487-1119

 RF amplifier, HF amplifier, RF amp, low noise amplifier, microwave amplifier,broadband amplifier, amplifier module from SPG

 


RF amplifier details and purchase options

A 40 Mhz to 2.5 Ghz, RF amplifier

New: A brand-new, unused, unopened, undamaged item in its original packaging. Packaging is done in a foam wrapper,which is itself enclosed in a ESD protected bag.

Item is a single stage RF amplifier with a typical gain range of 19.5 dB to 10 dB over a frequency range of 40 Mhz to 2.5 Ghz. It operates with a power supply range of 3.3V to 5.0V. The I/O connectors are SMA. The input and output is matched to 50 Ohm.  The linear output power is typically 4.4 dBm with a noise figure of 4.2 dB. The maximum typical supply current is 32 mA when the supply voltage is 3.3V. The OIP3 at 900 Mhz is close to 20 dBm when input power is -28 dBm. The OIP3 measurement was made with a frequency separation of 1 Mhz. At 900 Mhz the P1dB is 4.6 dBm. The maximum allowable input power is 10dBm referenced to 50 Ohm.
Dimensions are : 41mm X 15mm X 13mm

Typical applications are general RF amplification, antenna drivers, VCO buffers, power amplifier predrivers, etc.

Returns: 30 day or full refund

Purchase from Amazon

For more questions: contact SPG